BMW M3 gtr E92

[cd125]

This is my wip thread for my bmw, i choose this car because i think that is really hard to do.
I saw that a user of cgcars just do it time a go, and i use a lot of his image as reference for my project.
At the moment i have some trouble with the rear of the car, but i will work on it in this day.
For more detail and image go to cd125.wordpress.com , sorry but it is in italian...
Sorry for my english

[P2sta]

hey man, not bad work, but I suggest you to post better quality pictures

[cd125]

thanks p2sta, there are 2 wireframe of the car, i've some trouble with the back, please help me to do a clean wire

[3davt]

mesh is some places looks tricky

[ravenzep]

Where the bonnet meets the front bumper (those 2 elevated posts, around the grill area), you have different tesselations. Generally that s not very desirable as the shape cannot be the same. Maybe it s alright in this case.
Anyway, looks pretty cool man. Good luck.

Regards

[cd125]

thanks ravanzep, i forgot to fix it, i will do it soon.
i work on the rear to much today and these are the results
someone can help one?
thanks!

[ravenzep]

That area is tricky mate... sure.
But i see one thing that you should make better. I ll use the right side of the car as reference. See where you have that rib?now look at left and right side of it. On the left u have a fine square, but on the right you have a huge rectangle. If the right and left side of this rib had a square of the same size approximately, i m pretty sure it will give you a better result. You see, has you have it, the mesh is being pulled on each side of that rib very differently, one side is being more pulled than the other.
I think this little step will be a good start for that fix. Try mate.

Regards and good luck

[Cheltonjr]

Abour the second pic problem: try chamfering the rounding edge

[cd125]

thank's for the help to everyone
update with new rear bump and few changes on the front

comment please every my error, i really love working on this car and i hope to be a good work

[3davt]

Front bumper and splitter are a bit wrong
http://www.ultimatecarpage.com/image...2-M3-GTR_1.jpg

[cd125]

@3davt thanks for the correction

New detail on my bmw, correction on the bump, break disc and some detail on the side of the car

[P2sta]

the body still looks bumpy on many areas. try to clean it a bit

[cd125]

@p2sta i saw that bump but it's really hard to clean it

some new elements on the car, like the mirrors and more detail on the rear, i've some trouble with the line that pass over the trunk, there are 2 wireframe of the car, help me to clean the mesh if you can

[cd125]

it's like i'm talking to me, but it's the same, these are the updates...

[kriscabrera]

mesh looks a bit messy but it seems to work in some places, i suggest you slow down a bit and take care of your topology and get a good flow, and you will run into less bumps.